Flow M9 Binding
This is Flow M-9 is all around snowboard binding. It has a flex rating of about 4 out of 5, so it’s going to be a great binding for the person who likes to ride all over the mountain. From the groomers, to the powder, to the jibs, this is a great binding for that rider. Flow bindings are great because they have a couple of major features that most bindings don’t have. One being the 3D power strap, and also the power triangle.
The power triangle is a steel cable that’s connected to the base plate and runs and connects to the high back. Now, the high back is great because it actually reclines for an easy in and an easy out. All you have to do is lock the free lock in place and you’ll be set to go all day long. Now, there is adjustable tool-less forward lean. You just push and pull this little lever over to the side and you can get more or less forward lean. The 3D power strap has four contact points and they also have micro adjusters. But once you figure out the right fit for your boot, all you have to do is lock them down and you’re going to be set to go for the season. The base plate is a 30% nylon composite base plate, and actually the high back’s 50% composite nylon as well. There’s EVA cush padding on the base plate. This is going to be a great binding. It has a power strap, it has a reclining high back, and it has a 3D power strap, which gives you a lot more circulation than most traditional bindings. Again, this is the Flow M-9 Snowboard Binding for the all-mountain rider.
would is flow go with a burton antler deck?
Yeah, you just need to also get the Flow channel discs.