Ride MTNPIG Snowboard
Sale
$389.97
$649.95
Save
$259.98
40% Off
Select Board Size:
FREE Shipping
Estimated delivery in 5-7 days
Estimated delivery in 5-7 days
- In Stock
- Delivery to Change Address
- Delivery Fee Details
This item is excluded from all discounts and promotions.
Minimum order quantity of
1
Maximum order quantity of
100
Must purchase in increments of
1
Return Policy
We believe in offering the very best value, quality, and selection. Plus, we want you to enjoy your purchase! In the event you wish to send a product back to us, you may return most unused items for a refund or exchange, minus shipping, within 90 days from the date of purchase unless noted below under exceptions and exclusions. Refunds are issued to the original form of payment.
Features
Designed for high-speed turns and the most aggressive of the Pig series boards, the Ride MTNPIG Snowboard features split tail tech that allows for a more dynamic turn shape and board flex through turns. Ride the MTNPIG in your standard board length – unlike the rest of the Pig series that should be sized down. The half-moon split tail shape helps it sink in deep snow while providing a long effective edge, increasing overall edge hold for sketchy situations. Tapered Linear Quadratic sidecut allows for smooth turn initiation and powerful support through the turn without losing grip. Carbon Slim Walls reduce weight, increase damping, and increase energy transfer to enhance response and stability, while Carbon-Infused Glass provides extra pop. The MTNPIG is running wild and fast through the mountains, growing fat on powder, and should only be approached by an advanced rider.
Directional Extra Camber
A directional shape with a hybrid profile that has more camber than rocker.
Linear Quadratic Sidecut
A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.
Sintered Base
High-end sintered 4000 Ptex base material that is more durable, harder, and faster than extruded.
Performance Core
High-strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Carbon Slim Walls
Further improving on Ride's revolutionary Slim Wall technology, Carbon Slim Wall integrates a full-length Carbon-Urethane, composite laminate, that provides additional edge hold and energy transfer over the standard Slim Wall.
Carbon Array Laminates
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.
Carbon-Infused Glass Fiberglass
90° carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.
Impact Plates Laminates
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most.
Standard Top Sheet
Durable urethane top sheet material with graphics only RIDE can bring you.
Directional Extra Camber
A directional shape with a hybrid profile that has more camber than rocker.
Linear Quadratic Sidecut
A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.
Sintered Base
High-end sintered 4000 Ptex base material that is more durable, harder, and faster than extruded.
Performance Core
High-strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Carbon Slim Walls
Further improving on Ride's revolutionary Slim Wall technology, Carbon Slim Wall integrates a full-length Carbon-Urethane, composite laminate, that provides additional edge hold and energy transfer over the standard Slim Wall.
Carbon Array Laminates
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.
Carbon-Infused Glass Fiberglass
90° carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.
Impact Plates Laminates
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most.
Standard Top Sheet
Durable urethane top sheet material with graphics only RIDE can bring you.
| Size (cm) | Waist Width (mm) | Sidecut Radius (m) | Tip / Tail Width (mm) | Setback (mm) | Ref Stance (mm) | Rider Weight (lbs.) |
|---|---|---|---|---|---|---|
| 151 | 248 | 9.3/6.3 | 295/289 | -19 | 533 | 115-195 |
| 155 | 250 | 9.8/6.4 | 299/293 | -19 | 533 | 125-200 |
| 159 | 252 | 10/6.6 | 301/295 | -19 | 559 | 130-205 |
| 162 | 257 | 10.5/6.7 | 308/302 | -19 | 559 | 140-210 |
| 160W | 261 | 10.1/6.6 | 310/304 | -19 | 559 | 160-220 |
| 164W | 264 | 10.7/6.7 | 316/310 | -19 | 559 | 170-220 |
- The most aggressive of the Pig Series boards, designed for high-speed turns
- Split tail tech allows for a more dynamic turn shape and board flex through turns
- Tapered linear quadratic sidecut for smooth turn initiation and support through turn
- Carbon Slim Walls reduce weight, increase damping, and increase energy transfer
- Carbon-infused glass provides extra pop
Specs
Gender
Men's
Unit Weight
6.56 lb
Brand
Ride
MFG Part No.
R220200201162