The House

In this video HOW II we take a look at how to build a skateboard using all the basic skate components. If you’re new to skating it can sometimes be confusing on how all the parts fit together. This guide will help de-mystify the proper way to put together a skateboard complete. Here we go…‘How to Build a Skateboard’ with Windward Boardshop and the man in the black pajamas.

how to build a skateboard: what you’ll need

tools:

• deck
• trucks
• wheels
• bearings
• grip tape
• hardware
• tool

step 1: attaching the grip tape

• Remove the back of the grip tape and from nose to tail, then lay the grip centered on the deck. Make sure all of the air bubbles are pressed out.
• File an outline around the border of the deck.
• Along the outline use a razor blade to cut from underneath.

step 2: mounting the trucks

• With your screws set, slide the truck into place then twist on the nuts.
• Using your tool, tighten down the hardware.

step 3: attaching wheels and bearings

• Add the inside speed washer then put bearing on the axle.
• Press the wheel firmly down on the bearing until the bearings sinks in.
• Add the second washer and bolt then tighten.

step 4: adjusting the trucks

• Use the tool or allen key to adjust the kingpin.
• Remember, lefty loosy righty tighty for looser or stiffer truck feel.

NOW GO SKATEBOARDING.

GO FASTER.

TAKE CHANCES.