Description: SE Str-26 Quadangle SE BMX Bike
Before the Quadangle there was the STR-1. This dates back to the late 1970s when Stu Thomsen was SE Racing's National #1 pro and the sport's first superstar. His signature frame at the time was the Stu Thomsen Replica-1. The STR-1 frame had a unique design with both of the double down tubes wrapping underneath the bottom bracket shell and continuing around the Looptail rear end all the way back to the seat tube. Less than ten STR-1 bikes were produced, making them almost mythical and the most sought after frames of all time in the vintage BMX world. Fast forward 40 years to today and SE is proud to bring you the limited edition STR-26. All of the unique features and radness of the original STR-1, but built for the bigger rider with 26" wheels. This bike comes with an authentic SE Racing/Stu Thomsen trading card personally signed by Stu. Once again, SE's BMX history repeats itself.
Key Features of SE Str-26 Quadangle SE BMX Bike:
- Frame: Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
- Fork: Cowboy Cut Landing Gear, Full Cr-Mo
- Crankset: Redline Flight Cranks, Dual Pinch Bolt, 180mm, Sealed Bearing American Bottom Bracket, 39T Redline Flight Sprocket
- Pedals: X-Pedo Low-profile Platform w/ Removable Pins
- Chain: KMC Z410A
- Wheelset: Sealed Bearing 36H High-Flange Hubs w/ Double-wall Rims, 17T Freewheel, Stainless Spokes
- Tires: Vee Tire Co x SE Racing Cub, 26" x 2.0" Front & Rear
- Brakeset: Tektro 837-AL V-Brake, Slick Cable
- Brake Levers: Tektro 316A, 2-Finger Alloy
- Headset: Tange 1-1/8" Threadless
- Handlebar: Big Honkin' Cr-Mo Cruiser Bar, 29" x 6"
- Stem: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
- Grips: Special Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips w/ SE Donuts, Made in USA
- Seat: Stu Thomsen SE Flyer Seat
- Seatpost: SE Retro Fluted Micro-Adjust Alloy, 27.2mm
- Accessories: SE Racing Rad Plate, Chrome STR Quad Padset, Alloy Valve Caps, Cutom Stu Thomsen STR-26 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen
- Weight: 29.5 lbs / 13.38 kgs
- 2018 Model
Str-26 Quadangle SE
NOTE: All bikes are sold and delivered partially assembled. Final assembly should be done by a certified bike technician. Failure to have the bike assembled by a certified bike technician may void the warranty and could result in damage and/or injury if not assembled correctly.