Checking for your cart...
|Weight:||33 lbs. approx.|
|Recommended Use:||General, Fat Tire|
Grab your cape and set the dial to full send. After two and a half years of development and testing we are proud to roll out the Montana Carbon full suspension mountain crusher. The full carbon frame and rear triangle is dialed with 100mm of travel giving you line choices galore. The Horst link grants pedal efficiency when climbing and plush control during hair-raising descents. The Montana was crafted to deliver heart pounding speed on the downhill and mega efficient climbing power for going at it again and again.
SRAM X1 1X11 - From SRAM X1 comes the integrated drivetrain engineered in Germany for every rider and every trail. The simple, smart and synchronized design delivers confidence in the face of any terrain—from cross-country racing to all-mountain adventure. With our super-wide 10-42 gear range and multiple chain ring options, it's the universal drivetrain for experienced or new-to-the-trail riders. Featuring our X-SYNC chain rings, optimized MINI CLUSTER cassette and dependable X-HORIZON rear derailleur, X1 puts the power of the SRAM 1X philosophy into every ride.
ROCKSHOX MONARCH Shock - Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country.
|Key Features of Framed Montana Carbon Full Suspension Fat Bike - SRAM X1 1X11:|
|Frame:||FRAMED Exclusive UD Carbon Frame 177x12. EFBE approved, integrated headset, replaceable derailleur hanger, water bottle cage braze-ons, internal cable and housing routing.|
|Fork:||ROCKSHOX Bluto Suspension fork; 100mm Solo Air Spring, turnkey damping, post mount disc, 150x15mm thru axle|
|Rear Shock:||RockShox Monarch RT3|
|Headset:||FSA Headset Orbit C-40-Acb Integrated 1 1/8" - 1 1/2"|
|Crank Set:||Raceface Aeffect Crankset 32t|
|Bottom Bracket:||Raceface X-Type|
|Cassette:||SRAM X1 Cassette 10-42|
|Shifters:||SRAM X1 11 Speed|
|Rear Derailleur:||SRAM X1 Long Cage 1x11|
|Chain:||FSA Team Issue 11 Speed Chain|
|Brakes:||SRAM Level Hydraulic Brake|
|Brake Levers:||SRAM Level|
|Handlebars:||FRAMED Alloy Riser|
|Grips:||Raceface Half Nelson lock on grip|
|Bar Stem:||FRAMED Aluminum Alloy 100mm Threadless, 6 degree rise, 4 bolt|
|Seat Post:||FSA Dropper Post, Internally Routed, 31.6mm, 120mm Travel|
|Front Hub:||FRAMED Hub, 32 hole, 6 bolt, 150x15 Thru Axle|
|Rear Hub:||FRAMED Hub, 32 hole, 6 bolt, XD Driver, 177x12 Thru Axle|
|Rims:||Sun Ringle Mulefut rim, 26" x 80mm, tubeless compatible|
|Spokes:||2.0 Stainless Steel with Brass Nipple|
|Tires:||FRAMED Minnesota 26 x 4" 120 tpi folding|
|Weight:||33 lbs. approx.|
Montana X1 1x11 Full Suspension
NOTE: All bikes are sold and delivered partially assembled. Final assembly should be done by a certified bike technician. Failure to have the bike assembled by a certified bike technician may void the warranty and could result in damage and/or injury if not assembled correctly.