Checking for your cart...
|Weight:||33 lbs. approx.|
|Recommended Use:||General, Fat Tire|
Grab your cape and set the dial to full send. After two and a half years of development and testing we are proud to roll out the Montana Carbon full suspension mountain crusher. The full carbon frame and rear triangle is dialed with 100mm of travel giving you line choices galore. The Horst link grants pedal efficiency when climbing and plush control during hair-raising descents. The Montana was crafted to deliver heart pounding speed on the downhill and mega efficient climbing power for going at it again and again.
SRAM NX 1x11 Drivetrain - Whether you're discovering the mountain for the first time or you're an MTB lifer searching for a no-nonsense, no-worries 1x drivetrain, SRAM NX is ready for action and ready to take you there. NX brings you a wide range of gear choices engineered for simplicity and durability, so you can focus on what matters most — the ride ahead. German engineered and proudly bearing the SRAM 1x stamp of approval, NX is ready to let the world know what real riding feels like.
ROCKSHOX MONARCH Shock - Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country.
|Key Features of Montana NX 1x11 Bike w/ Alloy Wheels:|
|Frame:||FRAMED Exclusive UD Carbon Frame 177x12. EFBE approved, integrated headset, replaceable derailleur hanger, water bottle cage braze-ons, internal cable and housing routing.|
|Fork:||ROCKSHOX Bluto Suspension fork; 100mm Solo Air Spring, turnkey damping, post mount disc, 150x15mm thru axle|
|Rear Shock:||RockShox Monarch RT3|
|Headset:||FSA Headset Orbit C-40-Acb Integrated 1 1/8" - 1 1/2"|
|Crank Set:||Raceface Aeffect Crankset 32t|
|Bottom Bracket:||Raceface X-Type|
|Cassette:||SRAM NX PG 1130 11 Speed 11-42|
|Shifters:||SRAM NX 11 Speed|
|Rear Derailleur:||SRAM NX Long Cage 1x11|
|Chain:||KMC X11 11 Speed Chain|
|Brakes:||SRAM Level Hydraulic Brake|
|Brake Levers:||SRAM Level|
|Handlebars:||FRAMED Alloy Riser|
|Grips:||Raceface Half Nelson lock on grip|
|Bar Stem:||FRAMED Aluminum Alloy 80mm Threadless, 6 degree rise, 4 bolt|
|Seat Post:||FSA Dropper Post, Internally Routed, 31.6mm, 120mm Travel|
|Front Hub:||FRAMED Hub, 32 hole, 6 bolt, 150x15 Thru Axle|
|Rear Hub:||FRAMED Hub, 32 hole, 6 bolt, HG Driver, 177x12 Thru Axle|
|Rims:||FRAMED Alloy Rim, 26" x 80mm, not tubeless compatible|
|Spokes:||2.0 Black Stainless Steel with Brass Nipple|
|Tires:||FRAMED Minnesota 26 x 4" 120 tpi folding|
|Weight:||33 lb. approx.|
NOTE: All bikes are sold and delivered partially assembled. Final assembly should be done by a certified bike technician. Failure to have the bike assembled by a certified bike technician may void the warranty and could result in damage and/or injury if not assembled correctly.
2019 The House. All Rights Reserved
Enjoy our secure cart