Checking for your cart...
|Recommended Use:||Mountain - Cross Country, Mountain - Trail|
Born from a vigorous development process, the Marquette Carbon 27.5+ is the end product of extensive trail testing combined with the evolution of our carbon frame technology. This new addition to the Framed Bikes family is built with high modulus carbon laid to create an incredibly durable frame without sacrificing the damping effects high grade carbon is known for, all while delivering a lightweight cross country masterpiece.
The Marquette Carbon 27.5+ features BOOST spacing making this an ideal 27.5+ or 29er rig. The Marquette is completely internally routed, features a rear brake post mount, threaded bottom bracket shell, and two water bottle cage mounts. This timeless design is sure to have you hammering trails with the component group of your choice to your heart''s content.
|Key Features of Framed Marquette Carbon Bike 27.5x3" - X9 RST Fork:|
|Frame:||FRAMED High Modulus Carbon Fiber Frame 148x12. Integrated headset, replaceable derailleur hanger, 2 water bottle cage brazeons, internal cable and housing routing.|
|Fork:||RST F1RST 120mm 110x15 Thru Axle|
|Headset:||FSA Orbit C-40 Integrated|
|Crank Set:||SRAM GX-1000 X-SYNC BOOST 32t.|
|Bottom Bracket:||SRAM GXP External Cup|
|Cassette:||Sunrace 10 speed cassette 11-42t|
|Shifters:||SRAM X9 X-Actuation 10-Speed|
|Rear Derailleur:||SRAM X9 Long Cage Rear Derailleur 10 Speed|
|Chain:||KMC 10 Speed Chain|
|Brakes:||SRAM Level Hydraulic Disc|
|Brake Levers:||SRAM Level|
|Rotors:||SRAM Rotors, 160mm Front, 160mm Rear|
|Handlebars:||FRAMED All Mountain Aluminum Alloy 740mm|
|Grips:||RaceFace Half Nelson Lock-on|
|Bar Stem:||FRAMED Aluminum Alloy 80mm Threadless, 6 degree rise, 4 bolt|
|Seat Clamp:||Promax Seatpost Clamp MX-86|
|Seat Post:||FRAMED Lightweight Aluminum Alloy 400mm x 31.6mm|
|Front Hub:||PUB Hub Alloy, 32 hole, 110mm x 15mm Thru Axle|
|Rear Hub:||PUB Hub Alloy, 32 hole, XD Driver, 148mm x 12mm Thru Axle|
|Rims:||Alex MD50 Alloy Double Wall|
|Spokes:||2.0 Black Stainless Steel with Brass Nipple|
|Tires:||FRAMED Minnesota 27.5 x 3" 72 TPI Wire Bead|
|Disclaimer:||Framed Bikes reserves the right to substitute parts and components based on availability at time of purchase. Every effort will be made to substitute with a part of equal or better quality than what is listed or pictured. Photo of product may vary from what is listed in specs, as well as what ships.|
NOTE: All bikes are sold and delivered partially assembled. Final assembly should be done by a certified bike technician. Failure to have the bike assembled by a certified bike technician may void the warranty and could result in damage and/or injury if not assembled correctly.