Checking for your cart...
|Type:||29er, Gravel, Commuter, Mountain, Cyclocross|
|Weight:||Approx 27 lbs|
|Recommended Use:||General, Commuter, Cyclocross, Road - Gravel, Fitness Training, Mountain - Cross Country|
Inside all of us is an urge to break away from the doldrums of monotonous everyday life. No matter how hard we work to suppress that urge, sometimes we can’t fight it. Sometimes we have to feed that urge to unplug, clip in, and create our own adventure. What’s holding you back? Call out sick on Friday, load up the frame packs, and get lost on the ride in that search for the perfect spot to tie up your hammock. You may find yourself rattling over dusty two track straight through the night. You may find a dirt road that you’ve always wanted to ride down, but you never had the time, or energy, or equipment to make it worthwhile. This is your chance to break free!Find your own adventure on the all new Marquette Carbon Adventure bike.
Full SRAM Drivetrain - Combining a mix of the most dependable drivetrain components SRAM has to offer you’ll be ready to tackle the unknown with ease. The Marquette Carbon Adventure utilizes the latest SRAM 1x11 technology from both the mountain and road side to deliver the optimum in gear range, precision, and durability.
|Key Features of Framed Marquette Carbon 29in Adventure Bike Rival 1 w/ Reba Fork & Alloy Wheels:|
|Frame:||FRAMED High Modulus Carbon Fiber Frame 148x12. Integrated headset, replaceable derailleur hanger, 2 water bottle cage braze-ons, internal cable and housing routing.|
|Fork:||Reba Air 100mm Spring 110x15 Thru Axle|
|Headset:||FSA Orbit C-40 Integrated|
|Crank Set:||SRAM GX-1000 X-SYNC BOOST 32t|
|Bottom Bracket:||SRAM GXP External Cup|
|Cassette:||SRAM NX-1130 Full Pin Cassette 11-42t|
|Shifters:||SRAM Rival 1 shifters|
|Rear Derailleur:||SRAM Rival 1|
|Chain:||KMC X11 11 Speed Chain|
|Brakes:||AVID BB7 Road Mechanical Disc Brakes|
|Brake Levers:||SRAM Rival 1|
|Rotors:||SRAM Centerline Rotors, 160mm Front, 160mm Rear|
|Handlebars:||FRAMED Cross Aluminum Alloy 42mm|
|Grips:||RaceFace Half Nelson Lock-on|
|Bar Stem:||FRAMED Aluminum Alloy 80mm Threadless, 6 degree rise, 4 bolt|
|Seat Clamp:||Promax Seatpost Clamp MX-86|
|Seat Post:||FRAMED Lightweight Aluminum Alloy 400mm x 31.6mm|
|Front Hub:||PUB Hub Alloy, 32 hole, 110mm x 15mm Thru Axle|
|Rear Hub:||PUB Hub Alloy, 32 hole, XD Driver, 148mm x 12mm Thru Axle|
|Rims:||WTB Alloy Double Wall|
|Spokes:||2.0 Black Stainless Steel with Brass Nipple|
|Tires:||Maxxis Ignitor 2.25"|
|Weight:||27.5 lbs ~|
|Disclaimer:||Framed Bikes reserves the right to substitute parts and components based on availability at time of purchase. Every effort will be made to substitute with a part of equal or better quality than what is listed or pictured. Photo of product may vary from what is listed in specs, as well as what ships.|
NOTE: All bikes are sold and delivered partially assembled. Final assembly should be done by a certified bike technician. Failure to have the bike assembled by a certified bike technician may void the warranty and could result in damage and/or injury if not assembled correctly.