Item # wkro37ppwp1012zz-ronix-wakeboard-packages

Ronix Phoenix Project Wakeboard w/ Preston Bindings

Sold Out

Sorry this item is currently sold out.

Please use this discount coupon for an
additional 5% off during checkout:

H30404

VIEW LIKE PRODUCTS »

Specs

Core Material:
  • Foam
  • The highest strength to weight ratio we have ever tested - setting the standard of the most refined recipe of foam out there
Rocker Type:
  • Continuous
Center Fin:
  • No
Side Fins: 4 Bolt On
Flex Core: Yes
Rail Ready base:
  • Yes
Closure Type:
  • Speed Lace
Mounting System: 6 in
Tool-Less Mounting:
  • No
Sizing: Specific
Manufacturer Warranty: 1 Year

Description: Ronix Phoenix Project Wakeboard w/ Preston Bindings

The Phoenix Project opens up a new spectrum of board designs and riding styles allowing a rider to push all the way up the wake, and as the tail passes thru the peak, it continues to build energy - not dampening the ride like most "flex" boards out there. A rider can feel the shift in board energy from the nose to the tail the longer they wait due to the unique lay up and wide 28" stance option. A deck that you session more like your favorite snowboard, timing the wake with a later pop. Or just ride it like a traditional board with a mellower snap and super forgiving landings. With the Phoenix Project''s thinner profile and blended glass, you can feel a balance point- while pressing rails, the board flexes until it locks. A newfangled shape, winning the 2011 Alliance and Transworld favorite board of the year honors, for riders that want more of a snow/skate feel leaving the wake and added control on rails, or that just have a conventional style and want a smoother overall ride. For decades, our engineers have been developing different layups of glass, constructions, woods and foams to create a board that does one thing, store energy. New for this year, we have the Phoenix Project - S, lighter, a later kick, more feel on the water and control on rails.

The only boot worthy of being named after our hometown. This new Preston boot has hollowed ankles and a perforated liner with the most combined lateral movement and heel hold down. Most of our team riders are getting so much lower foot support from its unique construction that they aren''t even cinching up the top lace when riding at a cable park. Why is there a little Panda bear on the bottom of the boot? These boots are cultivated with a bamboo fabric, which makes Pandas and the environment mighty happy. The Preston boot uses our exclusive Ultralon Stage 2 foam, for the best in non heat moldable memory. A new boot that has the performance you would expect out of a high end Ronix boot without the custom orthotic price tag.

Key Features of the Ronix Phoenix Project Wakeboard:
  • Full center rail creates a smooth transferring board from edge to edge
  • Blends to a more vertical sidewall in the tip and tail allowing the board to ride higher on the water with more glide speed
  • Most exaggerated bottom bevel starts out at 4degrees blending to 18degrees on the ends super forgiving
  • and less likely to get hung up on rails
  • Deep symmetrical channels
  • help with acceleration thru a turn and push the rider into the wake
  • Subtle tunnel more efficient water flow and stabilizes landings
  • Rocker line carries a lot of speed up the wake making it easier for a rider to have a late take off
  • Sintered Base
  • The most durable non-stick base material we have ever tested on rails without loosing any glide speed on the water
  • Blended Glass
  • Our secret concoction absorbs more energy before rebounding it
  • a lightweight woven construction brings less swing weight and increased feel on the water to the board
  • Mod Pour
  • The highest strength to weight ratio we have ever tested
  • setting the standard of the most refined recipe of foam out there
  • 4 Slider Fins
  • A fin actually designed to be sessioned on rails, also for riders that like that finless feel, the wider design creates turbulence giving it a less gratuitous grip on the water
  • 4 Fiberglass 1.0" ramp fins
  • Versatile cable and boat board with a controlled flex
  • Ridden by Erik Ruck and Marc Rossiter
  • Length (cm): 137, 142
  • Tip Width (in): N/A
  • Mid Width (in): 16.9 (137), 17.1 (142)
  • Rocker (angle/arc): 8.1/Blended
Key Features of the Ronix Preston Bindings:
  • Single lasted with the most low profile and compact last
  • Double laces
  • a more customized fit
  • 3-D Molded tongue blends comfort and performance
  • Articulating cuff
  • the boot flexes with the rider without any pressure points
  • Stage 2 Liner
  • The best memory available in non heat moldable material
  • our exclusive high end Ultralon New Zealand Foam
  • Built in J-bars improve heel hold
  • Eco Innovation
  • no use of PVC solvents
  • Low friction eyelets
  • Baseless Hardware
  • The original low profile design delivers superior board control on an ultra-lightweight foundation
  • often imitated never duplicated
  • Tool Less Mounting Hardware
  • So simple a Neanderthal can use it, no screwdriver required
  • Bamboo Fabric
  • Pandas will be so jealous of our latest eco friendly concoction
  • Endorsed by Marc Rossiter and Erik Ruck

Phoenix Project


Customer Reviews | Add Your Review!


Browse 2 questions and 10 answers
Hide answersShow all answers | Sort by
Why did you choose this?
The-House.com Store
Upgrading my equipment and on-sale.
Phillip H on Jul 8, 2013