Specs
| Bottom Bracket: | American |
|---|---|
| Head Tube Angle: | 74.5 |
| Material: | HiTen |
| Rear End Length: | 13.75 |
| Stand Over Height: | 8.5 |
| Top Tube Length: | 20.4 |
| Type: |
|
| Weight: | 25 lbs |
Description
Framed Forge BMX Bike White 20"
Framed Forge BMX Bike is a bike with hand grip of Velo Mushroom. So we're talking about comfort and the ability to ride and maneuver effectively. This bike is made to use APSE Alloy U-Brakes for your safety especially when needing to stop your bike suddenly. A nice set of tires with this Forge BMX bike as well, Wanda King 20'' x 1.95 which helps you to have a decent ride when you're traveling! And lastly Framed creates this bike with Framed 2pc Bars (8'' Tall x 28'' wide) which adds comfort and a smile while traveling to your destination. Get your Framed Forge BMX Bike today!
- FRAME: Hi-Ten Steel
- FORKS: 1-1/8th Hi-Ten Steel
- BARS: Framed 2pc Bars (8″ Tall x 28″ Wide)
- GRIPS: Velo Mushroom 150mm
- STEM: Framed Alloy Front Load
- HEADSET: Neco 28.6 6/34/30mm
- BRAKE LEVER: APSE Alloy Lever w/Adjuster
- BRAKE: APSE Alloy U-Brake
- CRANKS: 1pc Forged Steel 175mm w/Unsealed American Bottom Bracket
- SPROCKET: 36t Steel
- CHAIN: KMC Z410
- PEDALS: 1/2" PC Resin
- FRONT HUB: 3/8" KT Unsealed Hub
- REAR HUB: 14mm KT Unsealed w/14t Freewheel
- RIMS: 36h Single Wall Alloy Pinned
- TIRES: Wanda King 20" X 2.125" Front 20" x 1.95" Rear
- SADDLE: Frame Padded Comp
- SEAT POST: Integrated
- CLAMP: Framed Alloy Clamp
- PEGS: Not Included
- TOP TUBE: 20.5”
- SEAT TUBE: 8”
- CHAINSTAY: 13.5”
- BB HEIGHT: 10.5”
- APPROX WEIGHT: 25lbs 2oz
- WHEELBASE: 38”
Forge
NOTE: All complete bikes are sold and delivered partially assembled. Final assembly should be done by a qualified BMX technician. Failure to have the bike assembled by a qualified technician may void the warranty and could result in damage and/or injury if not assembled correctly. As an industry standard, some bikes might have minor cosmetic blemishes due to the nature of shipping.


















