Item # k22strk09bk14zz-k2-snowboard-boots

K2 Stark Snowboard Boots

K2 Stark Snowboard Boots
Sale Price $172.87
Sugg. Retail: $379.95
55% OFF
You Save $207.08 Instantly
Qty:

In Stock

Ships Within 24 Hours
Sellout Risk: Extremely High

*Available for US Shipment Only.

Specs


Description: K2 Stark Snowboard Boots

The K2 Stark Snowboard Boots are as good as they get! When you need the best possible boot system that your money can buy, these K2 Stark boots should be right near the top of your list of possibilities. The Stark model boot features H3 BOA Coiler Lacing that is a breeze to tighten up and will stay locked and loaded no matter how hard you ride. They also come with intuition pro foam in the liner that increases comfort to seemingly unimaginable levels. Give yourself an added boost this riding season with the ultimate all around K2 Stark Snowboard Boots!

Key Features of the K2 Stark Snowboard Boots:
  • H3 BOA Coiler Lacing
  • BOA Conda Liner Lacing
  • Intuition Pro Foam 3D
  • Moldable Internal J Bars
  • Integrated Power Strap
  • Kwicker Light Outsole
  • Dual Density 3D Formed Tongue
  • 3D Formed Dual Density EVA with Harshmellow Footbed

Stark


4.3 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
0
0
1
Curious if these will work for Clickers??
Hoping to get some input on whether these Stark boots can really be used with the old-school Clicker bindings.

Reading these reviews, I see that three people claim they're Clicker compatible, but Peter D on March 3 claims they're not, and that they're set too far apart to be used in the Clickers.

Could anyone who has used these boots with Clicker bindings please weigh in and confirm or deny their compatibility? PLEASE? Did you have to modify the boots as Peter D is going to attempt?

THANKS so much. -Chuck J
March 4, 2015
Boulder, CO, US
Age: 45-64
Ability:
Expert
Careful, these aren't Clickers.
Although these are very similar to the old Clicker boots and bindings, they are not the same. I found this out the hard way. I thought they would fit right into my clicker bindings. They do not. They are nearly identical to clickers, but the new Quickers are slightly smaller. When I couldn't figure out why they wouldn't click in properly, I decided to measure them against my old Clicker boots. The contact points on the boots are slightly further apart on the old Clickers. It's about 1/8" difference. These Quicker boots won't click in properly. Too bad. I thought I'd found a nice new pair of boots. I'm going to try to modify the rear contact point by grinding it down to match the old boots. It's super hardened steel though, so it's not an easy task. I hope I can make them work.
March 3, 2015
Purchased
1 year ago
Ability:
Expert
Finally!
I have been riding "Clickers" since 2004 and haven't looked back. Over the years the only source for replacement boots was off of eBay. No more!

I got these a half-size up and are a perfect fit. The double BOA is amazing. I'm in & out of my gear before anyone else around.

These fit great with "Clicker" style flat bindings from the 90's-early 2000's. Hard butters, ollies, high speed carving...I have never come unattached to the bindings.

Throw in a Dr. Scholls gel insert for best comfort.

I can click in on the fly when exiting the lifts and even click in on the chair, where allowed, and sail past all the noobs sitting/bending down to strap in. I get 4-5 more runs in a day because of this. I even smoke people with Flow bindings.

I will grab the newer "Kwicker" bindings eventually because I want the Harshmellow and canted footbeds.

I'm more of a groomer/off-piste rider, but I don't shy away from riding these in the park on smaller boards. Just loosen up the outer boa for more flex and you're good2go.

Thanks K2!
P.S. Make more style/color options for Kwicker.
January 30, 2015
Aurora, IL, US
Age: 25-44
Ability:
Advanced
A "NEW" Clicker boot!!
I've been boarding since 2000 and skiing since 1969. I'm 63 yrs and fortunate to still be on the snow. I've been on clickers from the begining. I've rehabed boots in the past and still have a new pair in the wings. I like the convienence of a step in binding. The main issue I've had with clicker boots is they are too soft in the forward flex. I'm VERY excited with the new Stark boot as they are much stiffer in forward flex AND the dual BOA system is so user friendly being so quick to secure and release. The inner bladder is very comfortable and design of the outer shell should last a while with the one piece wrap around construction. I'm looking forward to the response and ride!
November 14, 2014
Purchased
over 2 years ago
Ability:
Expert
All the tech.
Double BOA. Easy on & off.
Clicker & Kwicker compatible.
Comfortable all day. Runs 1/2 size small. All mountain performance.
March 3, 2015
Purchased
1 year ago
They click into the old bindings
Finally they came out with a clicker boot! These fit the old clicker system, that k2 makes. I'm a size 12 and always had to buy used boots but now that these came out i don't look back!
November 25, 2016
BROOKLYN, NY, US
Age: 25-44
Ability:
Expert
So far so good....Warm / Dry and not hurting.
Been a Clicker / Kwicker user since 1996...have had about 4 pairs of K2 / Clicker / Shimano boots. These are very light / comfortable, and very adjustable. They took a little time to figure out how to adjust them to my liking, but they worked great the 1st day outta the box. Felt great support / stability, and my edge control was much improved over my prior boots, Shimano Skylords. I used these boots with my older K2 Magma Flat Clicker bindings, without an issue. I also own the K2 Kwicker BC bindings, but have not used them yet....need more snow for Back Country....will update after....Definitely recommend the K2 Stark boot....Solid / comfortable / Light, and no break in pain.
December 6, 2016
Sierra Nevada Mtns., CA, US
Purchased
3 weeks ago
Ability:
Advanced

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 47 answers
Why did you choose this?
The-House.com Store
Wanted dual boa lace system. Purchased K2 Contour previously, but outgrew.
Stacy R on Nov 29, 2016
My old clicker boots are starting to show their age, and I needed to replace them.
Gabriel W on Mar 7, 2014
Wanted dual boa lace system. Purchased K2 Contour previously, but outgrew.
Stacy R on Nov 29, 2016
only boot that fits my old K2 clicker binding ...
Nils R on Dec 21, 2014
My old clicker boots are starting to show their age, and I needed to replace them.
Gabriel W on Mar 7, 2014
I've been boarding sense 1993, I've ridden strap in binding, clicker and burton step in. People get all up in the air about only true boarders ride strap binding, friends don't let friends use step in binding. Wear what you like, use what works for you! Love the K2 step in system, looking to try the new boot for weight, flex and all mountain use.
Michael B on Jan 16, 2014
Kwicker boots 2013 offer great fits to old bindings
Dan S on Nov 21, 2013
These brand new boots, designed to work with the new K2 Kwicker Binding System, work fantastic with the old school K2/Shimano Clicker Bindings... They are a little rigid in the back, which is great in some situations, definitely a little rough for walking about in... However, if you loosen em up with the Boa Conda lacing system, it does make em a little easier to move around in.
Elijah D on Oct 16, 2013
only boot that fits my old K2 clicker binding ...
Nils R on Dec 21, 2014
I've been boarding sense 1993, I've ridden strap in binding, clicker and burton step in. People get all up in the air about only true boarders ride strap binding, friends don't let friends use step in binding. Wear what you like, use what works for you! Love the K2 step in system, looking to try the new boot for weight, flex and all mountain use.
Michael B on Jan 16, 2014
was wondering if the stark work with the old clickers with a hi-back?
A shopper on Feb 2, 2015
BEST ANSWER: Yes, but you wouldn't really get any utility from the high-back on the binding since the boots already have a high-back built into the rear of the boot. If you bought the Starks, I would pull/cut the high-back off the bindings if that's an option or buy the new Kwicker (non-splitboard) binding. Old non-high-back clicker bindings also work with these boots.
Hi I'm looking at buying a pair of these boots should a get a size up or down a or get the size of my old boots ??
Thanks
A shopper on Nov 22, 2015
BEST ANSWER: You should get the same size as your foot is measured to. The K2 Stark Snowboard Boots run true to size.
Size 14 available??
Hayes W on Dec 13, 2014
BEST ANSWER: Hayes,
We do not offer these K2 Stark Boots in a size 14. Here are boots we do: http://www.the-house.com/snbo-by-size.html?nocache=1&refine.size=14%20-%2014.5
Are the K2 Clicker Stark boots compatible with the Shimono K2 Clicker bindings ?
Ben B on Jan 24, 2016
BEST ANSWER: The sad answer is NO. I bought these thinking that they would fit right into my clickers and I'd have a nice new pair of boots. It seem that K2 decided to make them ever so slightly different. They don't "click" in properly. Although they look almost the same, they are different. I measured my old boots against these and the rear attachment is slightly different and slightly closer. By doing that they missed out on a huge old school Clicker customer base. Not smart. Good thing my old boots are still surviving.
can these only be used with clicker bindings?
A shopper on Oct 8, 2015
BEST ANSWER: Yes, these boots are only compatible with the clicker system. I purchased them last winter and rode the entire season. If you are not accustomed to having the high back built in to your boot you should be aware. I was very happy, having ridden earlier incantations of the system, they are super responsive in any turn. I would not recommend if you are a novice rider. If you like to go fast and be part of your board, they are awesome- also the ease of clicking in will allow you leave all the riders sitting in the snow behind.
Can these boots be used with regular bindings?
Lynn W. on Dec 30, 2015
BEST ANSWER: Theoretical possible I would think. But I wouldn't recommend it... they are much stiffer than regular boots since the have to transfer all forces from the binding to the shoe.
Are you able to remove the metal clips on the bottom of this boot?
A shopper on Dec 14, 2015
BEST ANSWER: No you can not remove the metal clips, they are built into the boot. I have several old style clickers as well as the new kwicker clickers and this boot does work with all of them.
Do they work with old K2 bindings? Answer is unclear below?
A shopper on Jan 10, 2014
BEST ANSWER: Yes the K2 Stark Snowboard Boots work with K2 Clicker Bindings.