|Type:||Freestyle, All Mountain|
|Entry Method:||Conventional Strap|
|Highback:||Asymmetrical, Single-Component Canted Living Hinge Zero-Lean Hi-Back with DialFLAD|
|Ankle Strap:||3D Profile, Superstrap and Gettagrip Capstrap|
|Toe Strap:||Toe Cap|
|Baseplate:||Fiber Reinforced, Single-Component 30% Short-Glass/Nylon Composite Re:Flex|
|Baseplate Padding:||Fullbed, Re:Flex FullBED Cushioning System|
|Ratchet Type:||Metal, Smooth Glide Buckles|
|Recommended Use:||Advanced, Intermediate|
|Baseplate Warranty:||1 Year|
|Manufacturer Warranty:||1 Year|
Description: Burton Mission Snowboard Bindings
Shred your tail off in the Burton Mission Snowboard Bindings! These high-tech bindings are constructed from the most recently developed Burton materials and are ready to complete whatever objectives you decide to set for yourself. Whether you are nailing down tricks in the park or getting covered in pow, the Mission is always successful. Pro-grade straps give you the comfort and high quality cushion your riding requires every day of the shred season. No challenge is too big for the Burton Mission Snowboard Bindings!
- Response: 6
- BASEPLATE: Single-Component 30% Short-Glass/ Nylon Composite Re:Flex
- HI-BACK: Single-Component Canted Living Hinge Zero-Lean Hi-Back with DialFLAD
- STRAPS: Superstrap and Gettagrip Capstrap
- BUCKLES: Smooth Glide Buckles
- CUSHIONING: Re:Flex FullBED Cushioning System
- Features Re-Ground Materials to Reduce Waste
Burton EST bindings will only work with Burton ICS channel boards. Non EST Burton bindings will fit any current board on the market today.
3 months ago
Just make sure you don't get the mission EST bindings. The mission EST bindings only work with the Burton rail system.
So you should be fine with the regular missions. Missions are really nice
(planning on using the bindings with a DC MLF Iikka Pro or DC Ply Snowboard)
I ride a size medium Burton Cartel Snowboard Binding with size 11 Burton SLX Snowboard Boots - all of the straps are adjusted to their longest length, but I like the snug baseplate / footbed.
Also, straps have really become pretty quick in-and-out - check out the Genesis from the 2015 Burton line, Insta-click and Flex Slider really make it quick and easy in and out. Really, though, any binding with a good "slapratchet" is almost as quick as most step-in bindings used to be...
M3 snowboards use the 4-hole mounting system and these Burton Mission Bindings will be compatible to that.
Hello. This version of the Burton Mission bindings are not Channel compatible. For the Burton Hate, take a look at these bindings: http://www.the-house.com/est-bindings.html
Mission EST: http://www.the-house.com/bt1mie02cb12zz-burton-snowboard-bindings.html
This version of the Mission Bindings are only usable wit the 3D or 4-hole system. If it says Mission EST... those are for the Channel System. http://www.the-house.com/bt1mise04bwo15zz-burton-snowboard-bindings.html