|Type:||Freeride, All Mountain, Freestyle|
|Entry Method:||Conventional Strap|
|Highback:||Asymmetrical, Single-Component Canted Living Hinge Team Skyback II with DialFLAD|
|Ankle Strap:||3D Profile, Superstrap|
|Toe Strap:||Toe Cap|
|Baseplate:||Fiber Reinforced, Single-Component 30% Short Glass/Nylon Composite|
|Baseplate Padding:||Fullbed, FullBED Cushioning System and NEW Under Baseplate Cushioning|
|Ratchet Type:||Metal, Smooth Glide Buckles|
|Compatibility:||Channel, 3D, 4x4|
|Recommended Use:||Beginner, Intermediate, Advanced|
|Manufacturer Warranty:||1 Year|
Description: Burton Mission Snowboard Bindings
When its all on the line Burton is the one boarders have turned to as their guide. It is no surprise they have come through again with the Burton Mission Snowboard Bindings. These bindings are designed to give you the boost you need in the park to blow away the competition. The addition of high back technology designed to absorb shock and reduce shake gives you an edge off jumps and rails. The straps and buckles are easily adjustable and are sure to keep you strapped in for the terrain ahead. Enjoy boarding this year with the Burton Mission Snowboard Bindings.
- BASEPLATE: Single-Component 30% Short Glass/ Nylon Composite
- HI-BACK: Single-Component Canted Living Hinge Team Skyback II with DialFLAD
- STRAPS: Superstrap and Gettagrip Capstrap
- BUCKLES: Smooth Glide Buckles
- CUSHIONING: FullBED Cushioning System and Under Baseplate Cushioning
- Features Re-Ground Materials in Baseplate and Hi-Back to Reduce Waste
Burton EST bindings will only work with Burton ICS channel boards. Non EST Burton bindings will fit any current board on the market today.
1 month ago
Hope this helps!
The Custom Smalls Snowboard uses the Channel Mounting System, and these Burton Mission bindings will work with that quite well. The thing to keep in mind when using adult bindings on a youth snowboard is the width. Anything other that the 'S' binding size will be too big... even here it will be close.
The 4x4 and 2x4 are both the standard 4-hole mounting system and will work together.
With the ankle and toe strap extendable ladders maxed out the 2012 size 9 Burton Invaders would fit in these Burton Mission Snowboard Bindings - but it's almost too tight.
Both straps are not able to be center properly on the boot and the ankle strap is only able to get a 1 or 2 clicks in with the ratchet.
You'd be better off getting the size medium Missions HERE: http://www.the-house.com/bt1msrf04bwo15zz-burton-snowboard-bindings.html