|Type:||Freeride, Freestyle, All Mountain|
|Entry Method:||Conventional Strap|
|Highback:||Asymmetrical, Single-Component Canted Living Hinge Hi-Back with DialFLAD|
|Ankle Strap:||3D Profile, Lushstrap|
|Baseplate:||Polycarbonate, Single-Component Lightweight, Bomb-Proof Polycarbonate|
|Baseplate Padding:||Fullbed, Removable ShredBED 2.0 Cushioning System|
|Ratchet Type:||Metal, Smooth Glide|
|Recommended Use:||Beginner, Intermediate|
|Manufacturer Warranty:||1 Year|
Description: Burton Custom Snowboard Bindings
Customize your setup this season with the classic Burton Custom bindings. These bindings are one of the most tried-and-true and are available once more to satisfy your shred requests. The Custom provides a playful feel with a flex rating of four but is also fully capable of powering through the rougher terrain when duty calls for it. They also feature a canted highback design that allows for a more natural fit to your boots for total comfort and control. Get accustomed to Burton's perspective. Get the Customs.
- Response: 4
- Baseplate: Single-Component Lightweight, Bomb-Proof Polycarbonate EST
- Hi-Back: Single-Component Canted Living Hinge Hi-Back with DialFLAD
- Straps: Lushstrap and Primo Capstrap
- Buckles: Smooth Glide Buckles
- Cushioning: Removable ShredBED 2.0 Cushioning System
Burton EST bindings will only work with Burton ICS channel boards. Non EST Burton bindings will fit any current board on the market today.
1 year ago
1 year ago
Garbage picked a blown out early twenty first century Sims FS600WD 157 in need of epoxy, fiberglass, a bit of edge and bindings. The choice was obvious and it won’t be the first time that the left coast and right coast self described founding fathers of snowboarding are together again making peanut butter and jelly.
Base/Disc...not much to cover here, a base is a base and a disc is a disc Mr. Burton has you covered.
Foot bed...front to back and side to side full coverage cushioned EVA for maximum comfort and minimum snow / ice buildup.
Accelerator pedals...adjustable for boot size with integrated ramp for instant toe, boot, edge response
Bindings...cap straps with tool-less adjustment, ankle straps that provide supple coverage.
Straps...pre bent and insertion easy.
Ratchets...high quality aluminum die cast anodized works of art
High Backs...if high backs are your thing these are probably great...I don’t ride with highbacks so these were immediately removed and tossed back in the box for future generations to ponder.
No nuts...back in the oldern days toe and ankle straps were affixed to the binding base with screws and nuts...Jake eliminated the nuts so everything is easy to adjust with merely a #2 or #3 Phillips.
Fast entry...fast enough. The sooner you are in the binding at the top the sooner you are standing in the lift line at the bottom so leave that “You ready?” to the dudes rockin’ Flow’s and enjoy your ride.
Go with the Customs.
5 months ago
Medium or Large should work.
They are also shaped for R and L foot. so make sure to identify this before mounting on your board.
These bindings are solid. Been working great for me.
I have a 2010 forum destroyer
I have a better deal for you...
K2 Lifelike ($257.97): http://www.the-house.com/9849k2lfl13zz-k2-snowboards.html
Burton Freestyle size medium (90.95): http://www.the-house.com/bt1fs02wh12zz-burton-snowboard-bindings.html
Hey, we have the 2015 Custom Flying V Wide in a 158, and the 2014 version in a 155cm
If you have between 9-15 degrees of binding angle you should be good to go. The Burton Custom Snowboard Bindings are great!
I am going to assume you mean the Nug Board from Burton? In that case, this version of the Custom bindings will not be compatible. You will want these: http://www.the-house.com/bt1cue02bk13zz-burton-snowboard-bindings.html, which will be identical in style, but be compatible to the Channel System.
Burton suggests that M size will be best for someone with a boot size between 8 and 11.
These Burton Custom bindings will not be compatible to the Channel System used by the Clash. Take a look at our Channel/EST options that will work: http://www.the-house.com/est-bindings.html Here are the compatible Custom EST Bindings: http://www.the-house.com/bt1cue02bk13zz-burton-snowboard-bindings.html
They will work well.
Your Morrow Lithium uses the 4 hole mounting system, and these bindings are compatible to that.
The Burton Custom Snowboard Bindings (non-EST) are compatible with 3D, 4x4, and Channel System mounting patterns.
Burton suggests that their medium sized bindings can fit size 8-11 men's boots.
Are you factoring in growth when looking at the size or are you going for a particular color. I would strongly advise not sacrificing performance for color.
i have a size 11 boot?
Yes that Burton Custom Snowboard Bindings will fit onto a Lamar Cruiser Snowboard.
Below I've placed the measurements for the Footbed (part boot sits on) Chassis (part that touches the board) and of the Burton Custom Snowboard Bindings. The Burton Custom Snowboard Bindings have an adjustable toe ramp that lengths...
Toe Ramp Adjusted Furthest In: 9.625"
Tow Ramp Adjusted Furthest Out: 10.125"
Toe Ramp Adjusted Furthest In: 9.875"
Tow Ramp Adjusted Furthest Out: 10.625"
What brand/model and size are your son's boots?
Yes the Burton Custom Snowboard Bindings will fit on your Never Summer Snowboard.