|Type:||Freeride, Freestyle, All Mountain|
|Core:||Dragonfly with Multizone EGD|
|Sidecut:||Modified, Stainless Frostbite Edges|
|Stance Setback:||.9 cm|
|Recommended Use:||Advanced, Intermediate|
|Manufacturer Warranty:||3 Year|
Description: Burton Custom X Wide Snowboard
The Burton Custom X Wide Snowboard is a directional board that is meant to be ridden downhill with the tip facing forward so that you are always sure you are headed in the right direction. The X Wide board is for advanced and intermediate riders that are looking to conquer the mountain from top to bottom. This board is rated as a freeride, freestyle and all-mountain ride so that you can carve the slopes, float through the powder of the backcountry and still be able to nail some tricks and spins as a freestyler. This board will keep you on your toes.
- BEND: Camber
- ITEM No. 10689100
- The Channel
- SHAPE: Directional
- FLEX: Twin
- CORE: Dragonfly with Multizone EGD
- FIBERGLASS: 45 degree Carbon Highlights Hi-Voltage
- BASE: Sintered WFO
- EXTRAS: Squeezebox, Stainless Frostbite Edges, Pro-Tip, and Infinite Ride
- Diecut Base Color Combinations May Vary
|Effective Edge (cm)||122||125.5||128|
|Tip Width (cm)||30.15||30.48||30.77|
|Tail Width (cm)||30.15||30.48||30.77|
|Waist Width (cm)||25.8||26||26.2|
Burton ICS channel boards will only work with Burton EST, Burton 3-hole or other ICS compatible bindings.
Burton 3-hole boards will only work with non-EST Burton bindings or other 3-hole compatible bindings.
Custom X Wide
1 year ago
1 year ago
Custom X wide deck is really nice thing. Nice strong edge, hardness is perfect to ride any type of terrain include mogul, half pipe, free riding terrain.
If I had to do it over again however I would get the Reflex Cartels instead of the EST. For me the EST design limits how much of an angle I can set the bindings to. Also I have found I need to check the tightness of the two screws holding the EST bindings on the board before riding. Twice this season the screws loosened during the day.
I wear K2 Maysis boots that are a couple years old. It is a pretty stiff responsive boot if I tighten down the two BOA cables systems. The boots are comfortable, warm and quick to adjust.
I have found the Custom X comes alive when you really pick up speed and aggressively get it up on edge. Great at carving and has nice pop out of the turns. Took it up icy half pipe walls and it worked great as well. I find it too stiff of a board to ollie and play around on at slower speeds though.
Hope this helps and good luck.
Hope this helps
With a size 11 boot you should ride a board with a 25.8cm waist width unless the boots your ride have shrinkage footprint reduction technology.