Item # 8965tott2cv12zz-sierra-skis

Teton Floater Rocker V2 Skis

Our Price
Sugg. Retail: $369.95
50% OFF
You Save $185.00 Instantly

In Stock

Ships Within 24 Hours
Sellout Risk: Extremely High



  • All Mountain
  • Park & Pipe
  • Twin Tip
Ability Level: Beginner-Intermediate
Rocker Type:
  • Hybrid
  • CamRock Hybrid Rocker
  • Cap
Core Material:
  • Wood
  • Extruded
Recommended Use:
  • Skiing
Manufacturer Warranty:
  • 1 Year

Description: Teton Floater Rocker V2 Skis

The Teton Floater Skis are built to ride everything the mountain has to offer. They are wide enough for the steeps and deeps yet playful enough for park. The Floater is Teton's widest ski, built to keep you afloat in the POW or on top of the water during any water skipping event. The CamRock (rocker/camber) design offers all mountain performance at a fair price. The cambered sections offer power and control while the elevated tip and tail provides a fun forgiving ride.

Key Features of the Teton Floater Rocker Skis:
  • Slant Cap Construction
  • All Mountain Park Ski
  • Wood core
  • German made steel edges full warped metal edges
  • Directional Taper
  • CamRock Hybrid Rocker
  • Length (cm): 157, 165, 171, 177, 183
  • Effective Edge (cm): 133 (157), 141 (165), 147 (171), 153 (177), 159 (183)
  • Tip/Tail Width (cm): 127/121 (157), 128/122 (165), 129/123 (171), 130/124 (177), 131/125 (183)
  • Waist Width (cm): 94 (157), 95 (165), 96 (171), 97 (177), 98 (183)
  • Sidecut (m): 18.5 (157), 19.5 (165), 20.1 (171), 21.5 (177), 23 (183)

Floater Rocker

Customer Reviews | Add Your Review!

  • "Pretty Decent"

    , Redding,CA
    Pros: Great Value,Floats in Powder, Cons:

    So I bought these skis last year and rode a whole season on them. While they are pretty decent skis they won't blow your mind. They float well enough in powder, probably in part due to the rocker tips and fairly wide stomp. They also hold their on on groomers too but don't expect to carve. However, on ice they don't inspire confidence. While its possible to ride ice the skis are chatter and won't hold a line super well. They are fairly light weight, for better or worse. Edge to edge is okay, Decently responsive. Durability...well they took a few rocks in the spring without issue. I don't hit the park so I can't attest to that but they've so far held up in normal skiing. Overall if you're an expert, pass on these. You'll need a better ski. However, if you are like me and are fairly advanced, and ride 10 to 15 times a year you can't really go wrong spending 100 dollars on these. They won't blow your mind but you'll have fun on the cheap. I'm satisfied enough to ride them this season, maybe even buy another teton brand for the girlfriend.

  • "TETON Floater Rocker V2"

    , South Burlington, Vermont
    Pros: Light Cons:

    Incredibly light ski that reminds me of the older Salomon 1080 Foil... This ski has a similar shape.

Teton Floater Rocker V2 Skis
Already Asked: 4 Questions, 30 Answers
Sort by: Store asked: Why did you choose this?
Anne G: My son has looked at a number of skis and thought these were awesome. Dec 15, 2013
carlos m: good price Dec 12, 2013
amy m: For my son who works for Deer Valley Ski Resort in PC. Dec 8, 2013
Daphne B: good ratings Dec 7, 2013
Brodrick C: cheap Nov 20, 2013
Sebastian G: Heard good reviews! Oct 25, 2013
Patricia P: CHEAP Aug 4, 2013
A shopper asked: So these skis can be mounted evenly in the center? Dec 21, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Paddy OStaff: Yes you can center mount these skis. But they do not have a symmetrical sidecut. The tail is just a bit narrower than the tip. Dec 30, 2013
Reply to Paddy Good answer? Yes (0) No (0)
Tisha A: I have my bindings mounted directly in the center. Yes. Dec 21, 2013
Reply to Tisha Good answer? Yes (0) No (0)
Kevin C: Yes' Dec 22, 2013
Reply to Kevin Good answer? Yes (0) No (0)
A shopper asked: Will "Fischer X 11 Wide Ski Bindings Brown/Black 90mm" fit for this ski? Jan 25, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
A shopper asked: which side of the ski is supposed to be mounted in the front, black or white? Dec 11, 2013
Answer this · Send to friends Good question? Yes (0) No (1)
Eli A: The blacks go in the front, but it really ought to be marked better. I only figured this out by measuring the width at the tip and tail and putting the larger end in front. The Tetons are fun in the park and decent in powder, but probably the softest most edgeless skis I've ever encountered. This doesn't mean you can't have fun with them, just keep that in mind if you take them into the bumps on any icy day or down fast hardpack, they won't hold very well. I used them as my teaching skis working at Taos last year and they were great for that. A very good ski for the price, but not a one ski quiver. Dec 11, 2013
Reply to Eli Good answer? Yes (0) No (0)
Christine C: It really depends on your preference, if you are mounting the bindings from factory settings the front of the skis are black, when I bought my skis I mounted my bindings on the factory labeled notches on the skis. These etched in lines set the binding just behind dead center. if you would like to mount the skis dead center or even further back you can face the skis in any position you want. Dec 15, 2013
Reply to Christine Good answer? Yes (0) No (0)
Andrew S: I had my bindings done at a ski shop, but they put the black part in the front. Honestly, I don't know if it will make much of a difference but I also don't know much about the mounting process. I like the black in the front because I thought that I would confuse the white with the snow but that is just my preference. Hope that helps. Dec 16, 2013
Reply to Andrew Good answer? Yes (0) No (0)
Daniel M: They mount just as they look in the picture top of the ski's are black. There is also a center line that u use with more of the ski would be in the front. These ski's are fun but have more tall than normal skis because they are part park ski's.. Hope this helps Dec 11, 2013
Reply to Daniel Good answer? Yes (0) No (0)
Simon M: The black side is in front and you will find a mark right next to the serial number on the side of each ski which is the place you should have the front of your boot when you are in your bindings. Hope this help. Dec 11, 2013
Reply to Simon Good answer? Yes (0) No (0)
kerri f: The black side is your front.. there are small hash marks on the ski that mark the center of where the binding mount should be. I love these skis. They are hard charging, fast and stable. Dec 12, 2013
Reply to kerri Good answer? Yes (0) No (0)
Bryan B: White was the front on mine per technician. Theres a line on the sides to.measure i believe. If i remember right they might be a centered ski so it might not really matter Dec 11, 2013
Reply to Bryan Good answer? Yes (0) No (0)
Paddy OStaff: Take these skis, your boots, and bindings to a local and trusted ski shop to be mounted by a certified professional. Dec 16, 2013
Reply to Paddy Good answer? Yes (0) No (0)
William P: If you measure the widest part of each tip you will see the black side is a little wider. That side goes out front. Dec 11, 2013
Reply to William Good answer? Yes (0) No (0)
catherine j: I mounted the black side up as shown on the picture but as the tips are of equal width it doesn't really matter... Dec 11, 2013
Reply to catherine Good answer? Yes (0) No (0)
Richard W: mount skis with the black in the front,white in the rear. they are a directional ski. hope that helps. Dec 14, 2013
Reply to Richard Good answer? Yes (0) No (0)
Gary B: The black side to the front, feel free to ask any questions I have been in the ski busines for 35 yrs. Dec 11, 2013
Reply to Gary Good answer? Yes (0) No (0)
Stacie B: depends on your preference. mine are mounted with black in front Dec 12, 2013
Reply to Stacie Good answer? Yes (0) No (0)
Jesse B: Mine are mounted with the black background teton to the front. Dec 11, 2013
Reply to Jesse Good answer? Yes (0) No (0)
John K: They are to be mounted black tips up an white down. Dec 11, 2013
Reply to John Good answer? Yes (0) No (0)
Shawn H: Black Side forward... Your going to love them. Dec 11, 2013
Reply to Shawn Good answer? Yes (0) No (0)
Ryan F: When you mount these skis, Black is the front. Dec 18, 2013
Reply to Ryan Good answer? Yes (0) No (0)
Kelley F: Black tips are the top/front of the ski. Dec 14, 2013
Reply to Kelley Good answer? Yes (0) No (0)
Jasen K: I have mine with black in front. Dec 11, 2013
Reply to Jasen Good answer? Yes (0) No (0)
Gary B: Black side front Dec 11, 2013
Reply to Gary Good answer? Yes (0) No (0)